You scan a signed quotation and open the PDF before emailing it to a customer. A thin black line runs from the top of the page through the signature, even though the original is clean. Before ordering toner or booking a repair, try three quick checks. All you need is one clean sheet with a few lines of text.
Compare a scan, a copy and a print
- Scan through the automatic document feeder. Open the saved PDF on your computer and check whether the line is visible on screen.
- Scan the same sheet on the flatbed glass. Lift the lid, position the sheet against the alignment mark and compare the two PDFs.
- Print a clean document from your computer. Use a file that looks clear on screen. This checks what happens when the printer works independently of the scanner.
What the results tell you
If the line appears only when you use the feeder, look at the narrow strip of scanner glass beside the main flatbed. During a feeder scan, each page moves past that strip. A small speck in one spot can leave a line down the entire scanned page. Follow your model’s cleaning instructions, then feed the same sheet through again to check the result.
If both saved PDFs show the line, keep the two samples. Since the mark is already visible on screen, replacing toner won’t remove it from the scan. If the line persists after the recommended glass cleaning, a technician can use those samples to investigate the scanner.
If the PDFs look clear but the printed page has a line, keep a marked printout. The technician can use the position and pattern of the mark to narrow down the cause before recommending a part.
Book an onsite printer check in Dubai or Sharjah
ZD Computer Trading LLC provides onsite office printer diagnosis in Dubai and Sharjah. To request a visit, send us a photo of the model label on the back of your printer and a one-minute video showing the fault. Let us know whether the line appears in the saved PDF, on paper or both. You can use a test page so your customer’s quotation stays private.

